Kitchen Remodel Cost in Dallas–Fort Worth, TX (2026)
In Dallas–Fort Worth, TX, a kitchen remodel typically costs about $33,000 – $45,000, about 6% above the national average. The calculator below is preset to Dallas–Fort Worth, TX labor rates, permit costs, and sales tax — adjust the size and finishes to match your project.
Typical cost in Dallas–Fort Worth, TX$33,000 – $45,000About 150 sq ft (10′ × 15′), mid-range finishes. Includes labor, permits, disposal, tax, and a 10% contingency.
Your project
sq ft
%
Kitchen remodel cost by size
| Kitchen size | Size | Mid-range cost |
|---|---|---|
| Small / galley | about 80 sq ft (8′ × 10′) | $18,000 – $25,000 |
| Average | about 150 sq ft (10′ × 15′) | $33,000 – $45,000 |
| Large with island | about 220 sq ft (14′ × 16′) | $47,500 – $65,000 |
Dallas–Fort Worth, TX prices from our calculator with its default scope. Your quotes will vary with site conditions and exact products.
Kitchen cost by finish level
| Finish level | Per sq ft | 150 sq ft total |
|---|---|---|
| Budget RefreshStock RTA cabinets, laminate or entry butcher block, basic ceramic tile, existing layout. | $135 – $190 | $20,500 – $28,000 |
| Quality Mid-RangeSemi-custom plywood cabinets, quartz or granite counters, tile backsplash, stainless sink & fixtures. | $220 – $300 | $33,000 – $45,000 |
| High-End CustomBespoke custom cabinetry, exotic quartzite/marble, commercial-grade appliances, relocated plumbing & island. | $350 – $480 | $52,500 – $72,500 |
National average for comparison: $205 – $285 per sq ft for mid-range finishes.
Where the kitchen budget goes
- Cabinets and hardware (35–40%) The single largest line item. Plywood boxes with solid-wood drawers outlast particleboard.
- Trade labor (25–30%) Licensed electrical and plumbing work, plus finish carpentry.
- Countertops and backsplash (12–15%) Slab, fabrication, sink cutouts, and tile labor.
- Permits and haul-away (5–8%) City inspection fees and a roll-off dumpster.
- Contingency (10%) Covers surprises like subfloor rot under an old dishwasher or wiring that is not up to code.
What changes the price in Dallas–Fort Worth, TX
- Labor rates: 108% of the national average Labor is often 40–50% of the total, so local trade wages move the price more than anything else.
- Sales tax on materials: 8.25% Applied to materials and equipment, not labor.
- Permits Permit costs run slightly above average.
Kitchen Remodel cost by city
Typical mid-range project (about 150 sq ft) in each metro, most expensive first.
| Metro | Typical cost | vs. US average |
|---|---|---|
| the San Francisco Bay Area, CA | $44,000 – $60,500 | +42% |
| New York City, NY | $42,500 – $58,500 | +37% |
| Boston, MA | $39,500 – $54,500 | +28% |
| Los Angeles, CA | $39,500 – $54,000 | +27% |
| Seattle, WA | $39,000 – $53,500 | +26% |
| Chicago, IL | $37,000 – $51,000 | +20% |
| Philadelphia, PA | $36,000 – $49,500 | +16% |
| Denver, CO | $35,500 – $48,500 | +14% |
| Miami, FL | $35,000 – $48,000 | +14% |
| Minneapolis–St. Paul, MN | $35,000 – $48,000 | +13% |
| Austin, TX | $33,500 – $46,000 | +9% |
| Dallas–Fort Worth, TX | $33,000 – $45,000 | +6% |
| Phoenix, AZ | $32,500 – $44,500 | +5% |
| Atlanta, GA | $32,500 – $44,500 | +4% |
| Houston, TX | $32,500 – $44,500 | +4% |
| San Antonio, TX | $31,000 – $42,500 | 0% |
| Raleigh–Durham, NC | $31,000 – $42,500 | 0% |
Other project costs in Dallas–Fort Worth, TX
Questions
Kitchen Remodel cost FAQ for Dallas–Fort Worth, TX
How much does a kitchen remodel cost in Dallas–Fort Worth, TX in 2026?
Our calculator puts a kitchen remodel in Dallas–Fort Worth, TX (about 150 sq ft, mid-range finishes) at about $33,000 – $45,000. Size, finish level, and local labor rates move the total, so enter your own numbers above for an itemized range.
What does a kitchen remodel cost per sq ft in Dallas–Fort Worth, TX?
Installed cost runs from about $135 per sq ft (Budget Refresh) up to about $480 per sq ft (High-End Custom), including labor, permits, disposal, tax, and a 10% contingency.
Why does a kitchen remodel cost more in Dallas–Fort Worth, TX?
Skilled trade labor in Dallas–Fort Worth, TX runs about 108% of the national average and sales tax on materials is 8.25%. Permit costs run slightly above average. Together that puts a typical project about 6% above the national average.
What is usually missing from a cheap kitchen quote?
Low bids often leave out city permits, dumpster haul-away, dedicated appliance circuits, drywall painting, and subfloor repairs. Ask for each in writing before you pay a deposit.
How long does a kitchen remodel take?
A cosmetic refresh can take 2–4 weeks. A full remodel with new cabinets, counters, and electrical usually takes 6–10 weeks, including a 1–2 week wait for countertop fabrication after cabinets are installed.